How To Repair Crack In Solid Wood Door

How to Fix a Crack in a Hollow Wood Door

Comments: 1
Favorites: 0
Completions: 1

How to Fix a Crack in a Hollow Wood Door

Time Required

xxx minutes - 1 hour

Introduction

This Fast Set tin can exist used to patch a crack in whatsoever hollow wood door. The materials that will need to be purchased include body/wood filler, sandpaper/sanding sponge, paint, putty knife, and a pigment brush. To preclude whatever hazards, gloves and a face mask are recommended. Overall, this Fast set should take no longer than an hr to complete and should not cost over $10 when purchasing the required materials.

Parts

No parts specified.

Clean and dust the affected area with a paper towel, rag, or brush.

Make clean and dust the affected expanse with a newspaper towel, rag, or brush.

Sand the affected area with a 60/80 grit sanding sponge.

Sand the afflicted expanse with a sixty/fourscore grit sanding sponge.
Any blazon of sand newspaper or sanding sponge will piece of work on wood surfaces.
It is recommended to place newspaper under the door to go on the sand/dust contained.

Remove any sand/dust with a paper towel.
It is recommend to utilise gloves to prevent any minor splinters.
Information technology is also recommended to use a confront mask to prevent inhaling any dust/sand.

Utilize putty pocketknife to employ body filler until an fifty-fifty layer is formed.
Start with a small amount and and so add more if needed.
A smaller putty knife allows for easier awarding in creases and folds.